A Level Chemistry_ Periodicity Guide

Before Learning about periodicity, you need to have a pre-required knowledge of following  points about periodic table from your GCSE  – 

1)What are groups in the periodic table?

The vertical columns are called groups.

2)What are periods in the periodic table?

The horizontal rows are called periods.

3)What are the trends in the periodic table?

The trends in the periodic table are properties that go down along each group.

THE MAIN IDEA BEHIND THE DEVELOPMENT OF PERIODIC TABLE –

The Periodic Table was developed over time to  provide chemists with a structured organisation of the known chemical elements from which they can make sense of their physical and chemical properties . In simpler language it helps to predict the properties of elements present in the same group without individually analyzing each of them, generalizing the concept.

Structure of Periodic Table – 

The above periodic table , you must have seen in your GCSE, but in A level Chemistry we expand our concept to classification based on blocks.

The idea behind it is –  An element is classified as s, p, d or f block according to its position in the Periodic Table, which is determined by its proton number.

How to check which element belongs to what block?

The simple way is to write the electronic configuration of the element and check the last electron is being added to which block.

Example1)Check the following elements belong to which block in the periodic table. 

a)Mg(atomic no. 12)

b)Fe(atomic no. 26)

Solution –

Step1) Write the electronic configuration of elements give – 

 Mg – 1s2 2s22 3p6 3s2

 Fe – 1s2 2s2 3p6 3s2 3p6  4s2 3d6

Step 2) Simply check elements are added to what block 

Mg its s block element.

Fe its d block element

General Trends in the Periodic Table (Important for A level Chemistry)

  1. Reactivity – It is the property of an element to react with other elements in the periodic table. The more reactive element is  the one that reacts  faster.

The reactivity is subjected to position of element in the periodic table

  • s block metals – For s block metals reactivity increases down the group.
  • p block non metals – For p block non metals reactivity decreases down the group.
  • d block(Transition metals) –These are rather unreactive metals and follow no general trends. It is the block of periodic table where you will find the most useful elements , e.g – copper , iron, silver etc.

    2) Atomic Radius – It gives an idea about the size of an atom . We cannot measure the radius of an isolated atom , it is measured as ½ of the distance between the nuclei of 2 atoms in a molecule.

Generally it follows the following trends.

Across the period –  it decreases as we move left to right in a periodic table.

Down the group – it increases as we move down in a group.

Fe its d block element

Trends in the properties of elements in  Period 3 

We will start this by defining the most important term called periodicity. It is the repetition in the physical and chemical properties when we move  across periodic table regularly.

  1. Melting and Boiling Point 

(AQA A Level Chemistry specifications demand that students should be able to  explain the melting point of the elements in terms of their structure and bonding)

Melting and boiling points have little broken trends in period 3 because we are moving from metals to non metals and further to noble gas. For your A level exams just keep these 3 points in mind.

  1. As we move from Na to Al it increases ,because the strength of metallic bonding increases. Each Na atom  gives just 1 electron for metallic bonding but Al gives 3 ,hence stronger electrostatic force of attraction between the positively charged metal centre and delocalized electrons.
  2. After Al we have transitioned to non metal which is Si.For non metals it depends upon the strength of intermolecular forces and the structure they are found in nature.   

 i) Si has the highest point  because it exists as a giant covalent structure ,hence a lot of energy is required to overcome forces. 

ii) for P ,S ,Cl it depends upon their structures again  P is found as P4 , S as S8 , Cl as Cl2 hence more the number of electrons stronger will be the strength of london dispersion forces therefore Sulfur(S8) has highest whereas Chlorine(Cl2) as  the lowest.

  1. Ar is a noble gas hence it exists as a single atom ,therefore has lowest melting and boiling point in the entire period 3.

EXAM TIP – Melting and Boiling points are a sure question for A levels. Try to learn this concept nicely with proper keywords.

Past Paper Question (1) – 

Explain, in terms of crystal structure and bonding, why silicon(IV) oxide has a higher melting point than phosphorus(V) oxide. 

SOLUTION- 

Silicon(IV) Oxide is a giant covalent compound with strong covalent bonds, hence a lot of energy is required to overcome these covalent bonds whereas phosphorus(V) oxide is not giant covalent compound its a simple covalent compound.It has weak van der Waals forces between molecules hence easy to overcome therefore it has lower melting point than silicon(IV) oxide.

2)Atomic Radius –  For this particular trend we will learn it in the form of Question answer format as keyword stuffing plays a major role in this topic.

What information do we get from the atomic radius of an atom?

Atomic radius tells us about the size of an atom. In general, the radius larger the particular molecule or atom.

In A levels they will ask you to compare size of the atoms, so larger the atomic radius bigger the size

How can we measure the atomic radius of an atom?

It is not possible to measure the radius of an isolated atom.

Atomic radii are taken to be half the distance between the centres of the pair of atoms.

What are different types of atomic Radius?

Ionic Radius , Metallic Radius and covalent Radius.

Covalent Radius are most commonly used as even metals make covalent bonds in the gas phase.

What is the general trend of atomic radius?

Across a period(left to right )  – it decreases 

Down a group – it increases.

Explain the trend of atomic radius in period 3 from Na to Cl .

This is one of the most important concept for A levels(AQA , Edexcel,CIE & OCR)

When we move from Na to Cl  the shielding is constant as inner electrons are the same but nuclear charge increases from +11 to +17 hence the outermost electron is pulled closer to the nucleus due to increase in nuclear charge therefore the radius decreases. 

Tutor Tip – While explaining across period trends keep in mind the shielding remains constant and nuclear charge is increasing.

 Why does the atomic radius increase down the group?

Atomic Radius increases down the group because as we move down in a group an extra shell is added so the outermost electron is moving away from the nucleus hence increasing the radius.

Past Paper Question (2)

The elements in Period 2 show periodic trends.

 Identify the Period 2 element, from carbon to fluorine, that has the largest atomic radius. Explain your answer. 

SOLUTION –

Carbon has the highest atomic radius.

This is because the nuclear charge on carbon is the least hence the comparatively outermost electron is loosely bonded than other elements.

3)Ionization Energy- This is the  most important trend for A levels.

What is ionization energy?

Ionisation energy is the energy required to convert a mole of isolated gaseous atoms into a mole of singly positively charged gaseous ions. that is. to remove one electron from each atom. 

How to represent ionization in terms of chemical equation?

 Let’s write it for an element (E)

 E → E+ +e–

Patterns of First Ionization Energy – 

What is the general trend of ionization energy?

Across the period – in general ionization enthalpy increases across the period.

Down the group –  in general ionization enthalpy decreases down the group.

Explain the trend of ionization energy for the period 3 in detail.

In general ionization energy increases across the period., but there are certain anomaly in graph.

 Decrease of ionization energy from group 2 to group 3 – 

For the first ionisation energy:

 â€¢ magnesium, ls2 2s2 2p6 3s2 , loses a 3s electron 

• aluminium, Is2 2s2 2p6 3s2 3p1 ,loses the 3p electron. 

The p-elenron is already in a higher energy level than the s-electron, so it takes less energy to remove it 

 Decrease of ionization energy from group 5 to group 6 –

• phosphorus, 1 s2 2s2 2p6 3s2 3p3, has no paired electrons in a p-orbital because each p-electron is in a different orbital 

• sulfur, ls2 2s2 2p6 3s2 3p4 , has two of its p-electrons paired in a p-orbital so one of these will be easier to remove than an unpaired one due to the repulsion of the other electron in the same orbital. 

Explaining  Successive ionisation energies 

If you remove the electrons from an atom one at a time, each one is harder to remove than the one before. 

Past paper Question(3)

The graph shows the successive ionisation energies of a Period 3 element, X. 

Identify element X. Explain your choice. 

SOLUTION –

The element is Phosphorus.

Explanation –  If we look at successive ionization energy there is large jump in for the 6th ionisation energy , this particularly happens when an electron is removed from the second energy level which can happen only for phosphorus as the outermost shell just has 5 electrons and 6th electron lies in the inner shell.

Past Paper Question(4)

Which element has the highest first ionisation energy? 

A Aluminium 

B Phosphorus

C Silicon

D Sulfur 

Solution –   B (refer to graph for explanation)

Past Paper Question(5)

Which of these elements has the highest second ionisation energy? 

A Na 

B Mg 

C Ne 

D Ar 

Solution –   A ( second electron is removed from inner shell 2)

Past Paper Question(6)

Sulfur exists as S8 molecules and chlorine as Cl2 molecules. Use this information to explain the difference in their melting points. 

SOLUTION – 

Both S8 and Cl2 molecules are covalent molecules and melting point for them depends upon strength of intermolecular forces. S8 has more electrons hence stronger intermolecular forces whereas Cl2 has weaker intermolecular forces hence lesser energy required to overcome it ,therefore has lower melting point than S8.

Past Paper Question(7) 

Identify an element from the first four periods that fits each of the following descriptions. (i) The element that forms a 2– ion with the same electronic configuration as Ar. 

(ii) The element that forms a 3+ ion with ten electrons. 

(iii) An element that forms a compound with fluorine with trigonal planar molecules. 

(iv) The element that forms a chloride XCl2 with a molar mass of 111.1 g mol–1 . 

(v) The element with the largest atomic radius.

 (vi) The element with the smallest first ionisation energy. 

SOLUTION – 

 (i) S  

 (ii) Al

 (iii) B 

 (iv) Ca 

 (v) K

 (vi) K 

Leave A Comment

Your email address will not be published. Required fields are marked *